12205
Direct inquiry

Dear customers, partners and colleagues!

In this section you can send your message personally to the General Director of Rubex Group company.

Your inquiry will be considered within two working days.

Name*

Phone

e-mail*

Issue*

Message:

Rubex Group produces high-quality rubber technical plates, intended for production of gaskets and seals operating in air environment at temperature from -30 to +60 °C.

They are intended for rubber product manufacture serving for consolidation of fixed connections, prevention of friction between metal surfaces, for perception of single impact loads, and also as gaskets, floorings and other incompressible products.
1st and 2nd classes are produced;
types: Ф -molded sheetings, Н- non-moulded sheetings;
types – I –rubber sheet, II – rubber-textile plate, with one or several fabric layers.
The quantity of fabric layers is determined by agreement with the manufacturer taking into account that on each 2 mm of a liner there should be not more than one fabric layer.

Operational environment:
The air spaces, containers of vessels, inert gases at a pressure of from 0.05 to 0.4 MPa or oils, petroleum-based fuels, petrol at a pressure of 0.05 to 10.0 MPa.

ТИП / КЛАСС ТОЛЩИНА, мм ШИРИНА, мм ДЛИНА, мм
type / class thickness, мм width, мм length, мм
Moulded rubber (type I) / Class 1 [in plates] 8 / 12 / 16 / 20 1000 1000
Moulded rubber (type I) / Class 2 [in plates] 8 / 10 / 14 / 20 / 40 1000 1000
Non-moulded rubber (type I) / Class 1 [in plates] from 1 to 12 from 300 to 1200 from 500 to 2000
Non-moulded rubber (type I) / Class 1 [in rolls] from 1 to 12 from 300 to 1200 from 500 to 7500
Non-moulded rubber (type I) / Class 2 [in plates] from 1 to 12 from 300 to 1200 from 500 to 2000
Non-moulded rubber (type I) / Class 2 [in rolls] from 1 to 12 from 300 to 1200 from 500 to 7500